Product Center

Mainly produce the following products suitable for rubber and plastic processing industries: open mill series, calender series, internal mixer series, kneader series, drum vulcanizer series

Product Category

Internal mixer for plastics
Internal mixer for plastics
[Use]
This machine is used for the mastication of rubber and plastics and the mixing of various rubber materials and plastics.
[Features]
1. The mixing chamber has a drilled structure with fast heating and cooling speeds and good effects. The inner wall is plated with hard chromium and has a long service life.
2. The top and two sides of the two-sided, three-sided, and four-sided rotor ridges are welded with German imported hard alloy, and all working surfaces are plated with hard chrome,
Wear-resistant and beautiful, the inner cavity of the tangent, biting, and synchronous rotors can pass cold and hot media.
3. The top adopts hydraulic constant pressure sealing structure, high pressure oil lubrication, automatic alarm for oil cut, good sealing effect and long life.
4. When the machine is overloaded for too long, the top bolt will automatically decompress to protect the machine and prolong its service life.
5. The working surfaces of the upper and lower top bolts are plated with hard chrome, the surface is wear-resistant and beautiful, and the bottom top bolt can pass through cold and hot media.
6. The unloading door adopts double rack type hydraulic cylinder, and the linear cylinder is locked, working stably and positioning accurately.
7. Adopt double output shaft hard tooth surface reducer, and adopt gear coupling or cross universal coupling to drive, the transmission is flat
High stability and efficiency, low noise and long service life.
Read more

Internal mixer for plastics

Internal mixer for rubber
Internal mixer for rubber
[Use]
This machine is used for the mastication of rubber and plastics and the mixing of various rubber materials and plastics.
[Features]
1. The mixing chamber has a drilled structure with fast heating and cooling speeds and good effects. The inner wall is plated with hard chromium and has a long service life.
2. The top and two sides of the two-sided, three-sided, and four-sided rotor ridges are welded with German imported hard alloy, and all working surfaces are plated with hard chrome,
Wear-resistant and beautiful, the inner cavity of the tangent, biting, and synchronous rotors can pass cold and hot media.
3. The top adopts hydraulic constant pressure sealing structure, high pressure oil lubrication, automatic alarm for oil cut, good sealing effect and long life.
4. When the machine is overloaded for too long, the top bolt will automatically decompress to protect the machine and prolong its service life.
5. The working surfaces of the upper and lower top bolts are plated with hard chrome, the surface is wear-resistant and beautiful, and the bottom top bolt can pass through cold and hot media.
6. The unloading door adopts double rack type hydraulic cylinder, and the linear cylinder is locked, working stably and positioning accurately.
7. Adopt double output shaft hard tooth surface reducer, and adopt gear coupling or cross universal coupling to drive, the transmission is flat
High stability and efficiency, low noise and long service life.
Read more

Internal mixer for rubber

上一页
1
2

技术实力

技术实力

高新技术企业

自主研发实力

产品实力

产品实力

 

工艺美观,远销国内外

研发实力

研发实力

数十项实用型专利发明

 

服务保障

服务保障

确保提供优质的产品

完善的服务 。

Tengyu Advantage

 

Tengyu

Professional team

PROFESSIONAL ELITE TEAM,BRING FORTH NEW IDEAS

Tengyu

Boutique gathering

FACTORY DIRECT SALES,PURSUE PERFECT AND CAST REFINEMENT OUT OF DETAIL

Tengyu

Quality Assurance

ADVANCED TECHNIQUES,QUALITY ASSURANCE

Tengyu

Create value

BE PRAISED BY EVERYONE , CREATION OF VALUE

About Tengyu

Wuxi Tengyu Environmental Protection Technology Co.,Ltd  It is an emerging enterprise specializing in the production of rubber and plastic machinery. The company has production capabilities such as welding, heat treatment, metal cutting, electrical control, etc., has advanced measurement and testing methods and a sound quality assurance system, and has an experienced and strong design capability Engineering and technical team.

Wuxi Tengyu Environmental Protection Technology Co.,Ltd

The company mainly produces the following products suitable for the rubber and plastic processing industries: open mill series, calender series, internal mixer series, kneader series, drum vulcanizer series. The company has a strong manufacturing capacity of complete sets of production lines. After continuous development and optimization of product structure, the tire cord fabric glued high tension rolling production line, wide conveyor belt rolling production line, various rubber products (such as rubber seals, triangle belts, etc.) rolling production line , PVC artificial leather calendering production line, PVC soft film, rigid sheet calendering production line, LVT floor midsole four-roller, two-roller calendering production line, LVT floor laminating production line. Among them, the LVT laminating production line is the only domestic enterprise that has mastered all core manufacturing technologies. The company's products are not only sold nationwide, but also exported to nearly 30 countries and regions in Southeast Asia, Europe, South America, and Africa.

Company Profile

Qualification honor

Company culture

Case show

TENGYU
  • 2016

    Y

    Established

  • 15000

    Land area

  • 8000

    M

    Annual sales

NEWS CENTER

Realize the integration and optimization of resources with professionalism and open cooperation, and pursue a win-win effect with all sectors of society

  • 2021-07-26
    Correct operation method and precautions of open mill
    The open mill focuses on use and maintenance. Good operating habits and process protection can greatly increase the life of the machine and reduce the safety factor of the operator when using it. Protecting the safety and health of workers in production is an important policy of our country. Protecting national property and promoting production development are important duties of enterprise management.
    Read more +
  • 2021-07-26
    The rules before turning on the mill must be followed one by one!
    The correct operation of the mill must first adjust the roll pitch and maintain the balance of the roll pitch. If the adjustment of the roller pitch at both ends is different, it will cause the rollers to be unbalanced and easily damage the equipment. This is strictly prohibited. After the work is finished, cut off the power supply and close the water and steam valves.
    Read more +
  • 2021-07-26
    The working principle of internal mixer
    An internal mixer is a machine that is equipped with a pair of rotors with a specific shape and relatively rotating, and intermittently plasticizes and mixes polymer materials in a closed state with adjustable temperature and pressure. The following editor of Xianji.com will introduce the working principle, structure, purpose, operation method and precautions of the internal mixer in detail.
    Read more +
  • 2021-07-26
    Calculation of internal mixer processing capacity
    The total volume of the internal mixer-the volume of the cavity formed by the internal mixing chamber, side support (or retaining ring), discharge gate, and mound minus the volume of the two rotors in the internal mixing chamber. It is the main parameter indicating the size of production capacity, and is generally adopted according to series standards.
    Read more +

Website

Tengyu

Mobile official website

Wuxi Tengyu Environmental Protection Technology Co.,Ltd

Service Hotline:

Company address:

No. 126, Xinyuan Road, Ehu Town, Xishan District, Wuxi City, Jiangsu Province

All rights reserved:Wuxi Tengyu Environmental Protection Technology Co.,Ltd     苏ICP备2023005789号-1   www.300.cn

All rights reserved:Wuxi Tengyu Environmental Protection Technology Co.,Ltd

苏ICP备2023005789号-1

www.300.cn