产品中心
Number of views:
1000

PVC plastic floor rolling line

Uses and features:
It is suitable for the production of LVT plastic floor and wallboard products with a thickness of 4.5mm-5.5mm.
1. The automatic weighing system is used for weighing to ensure the accurate measurement of each ingredient.
2. Adopt internal mixer to masticate the rubber material, with good dispersion effect, high working efficiency and no dust in the environment.
3. Adopt four (two) roll calender to produce film with high precision.
4. The roller adopts peripheral drilling roller and the surface is sprayed with tungsten carbide treatment, which is strong and wear-resistant, and the temperature error of the roller surface is small.
5. Each roller is independently driven by a motor, the transmission is stable, and the roller speed ratio can be adjusted arbitrarily, which can meet the requirements of different processes.
6. The roller support bearing adopts high-precision calender bearings, with high centering accuracy, and the thickness error of the product can reach within ±0.01mm.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
Product description
Parameters

Product parameters

 

Model
Model

SY-4Γ1680

SY-4Γ1730

SY-4Γ1830

Roller diameter (mm)
Roll diameter

560

610

660

Working length of roller (mm)
Roll working length

1680

1730

1830

Production line speed (m/min)
Speed ​​of production line

3.5-35

4-40

4-40

Maximum product width (mm)
Max.product width

1350

1500

1550

Product thickness (mm)
Product thickness

0.8-2.5

0.8-2.5

0.8-2.5

Motor power of the whole line (kw)
All line motor power

772

852

922

Production capacity (t / year)
Production capacity

~5000

~7000

~7200

 

Keyword:
production
line
mm
product
of
0.8-2.5
sy-4
motor
thickness
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Previous
Next

Related Products

 Single output shaft rubber mixing machine
Single output shaft rubber mixing machine
[Use]
Used in rubber mixing, hot mixing, sheeting and plastic mixing and other processes.
[Features]
1. The roller is made of alloy chilled cast iron with high hardness and good wear resistance
2. The temperature control adopts the intelligent temperature control system, and the temperature control is fast and precise to ensure the quality of the rubber compound.
3. The models can be configured and selected according to their own special needs.
 Plastic mixing machine
Plastic mixing machine
[Use]
Used in rubber mixing, hot mixing, sheeting and plastic mixing and other processes.
[Features]
1. The roller is made of alloy chilled cast iron with high hardness and good wear resistance
2. The temperature control adopts the intelligent temperature control system, and the temperature control is fast and precise to ensure the quality of the rubber compound.
3. The models can be configured and selected according to their own special needs.
 Laboratory rubber mixer
Laboratory rubber mixer
[Use]
Used in rubber mixing, hot mixing, sheeting and plastic mixing and other processes.
[Features]
1. The roller is made of alloy chilled cast iron with high hardness and good wear resistance
2. The temperature control adopts the intelligent temperature control system, and the temperature control is fast and precise to ensure the quality of the rubber compound.
3. The models can be configured and selected according to their own special needs.
 Double output shaft rubber mixing machine
Double output shaft rubber mixing machine
[Use]
Used in rubber mixing, hot mixing, sheeting and plastic mixing and other processes.
[Features]
1. The roller is made of alloy chilled cast iron with high hardness and good wear resistance
2. The temperature control adopts the intelligent temperature control system, and the temperature control is fast and precise to ensure the quality of the rubber compound.
3. The models can be configured and selected according to their own special needs.
 Double drive rubber mixing machine
Double drive rubber mixing machine
[Use]
Used in rubber mixing, hot mixing, sheeting and plastic mixing and other processes.
[Features]
1. The roller is made of alloy chilled cast iron with high hardness and good wear resistance
2. The temperature control adopts the intelligent temperature control system, and the temperature control is fast and precise to ensure the quality of the rubber compound.
3. The models can be configured and selected according to their own special needs.
 Hydraulic adjustable pitch mixing machine
Hydraulic adjustable pitch mixing machine
[Use]
Used in rubber mixing, hot mixing, sheeting and plastic mixing and other processes.
[Features]
1. The roller is made of alloy chilled cast iron with high hardness and good wear resistance
2. The temperature control adopts the intelligent temperature control system, and the temperature control is fast and precise to ensure the quality of the rubber compound.
3. The models can be configured and selected according to their own special needs.
 Tire one-time low-temperature rubber mixing system
Tire one-time low-temperature rubber mixing system
[Use]
The system consists of a set of auxiliary machines, a high-speed internal mixer, two to six open mill systems, a film ejector, and a set of film
Composed of cooling device and other auxiliary equipment. Carry out the preliminary master batching of the rubber in the internal mixer, and then complete the replenishment on the open mixer
Mixing and final mixing, from the input of raw materials to the output of the final compound, are completed in one continuous step.
[Features]
1. Instead of the traditional multi-stage mixing, the rubber material can complete the final mixing process in one pass through the internal mixer.
2. The rubber preparation time is short and the rubber quality is high.
3. The system has a high degree of automation, and only 2-3 operators are required.
4. The system occupies a small plant area, saves more than 1/3 of equipment investment, and saves energy consumption by 20%.
 Internal mixer for plastics
Internal mixer for plastics
[Use]
This machine is used for the mastication of rubber and plastics and the mixing of various rubber materials and plastics.
[Features]
1. The mixing chamber has a drilled structure with fast heating and cooling speeds and good effects. The inner wall is plated with hard chromium and has a long service life.
2. The top and two sides of the two-sided, three-sided, and four-sided rotor ridges are welded with German imported hard alloy, and all working surfaces are plated with hard chrome,
Wear-resistant and beautiful, the inner cavity of the tangent, biting, and synchronous rotors can pass cold and hot media.
3. The top adopts hydraulic constant pressure sealing structure, high pressure oil lubrication, automatic alarm for oil cut, good sealing effect and long life.
4. When the machine is overloaded for too long, the top bolt will automatically decompress to protect the machine and prolong its service life.
5. The working surfaces of the upper and lower top bolts are plated with hard chrome, the surface is wear-resistant and beautiful, and the bottom top bolt can pass through cold and hot media.
6. The unloading door adopts double rack type hydraulic cylinder, and the linear cylinder is locked, working stably and positioning accurately.
7. Adopt double output shaft hard tooth surface reducer, and adopt gear coupling or cross universal coupling to drive, the transmission is flat
High stability and efficiency, low noise and long service life.
 Internal mixer for rubber
Internal mixer for rubber
[Use]
This machine is used for the mastication of rubber and plastics and the mixing of various rubber materials and plastics.
[Features]
1. The mixing chamber has a drilled structure with fast heating and cooling speeds and good effects. The inner wall is plated with hard chromium and has a long service life.
2. The top and two sides of the two-sided, three-sided, and four-sided rotor ridges are welded with German imported hard alloy, and all working surfaces are plated with hard chrome,
Wear-resistant and beautiful, the inner cavity of the tangent, biting, and synchronous rotors can pass cold and hot media.
3. The top adopts hydraulic constant pressure sealing structure, high pressure oil lubrication, automatic alarm for oil cut, good sealing effect and long life.
4. When the machine is overloaded for too long, the top bolt will automatically decompress to protect the machine and prolong its service life.
5. The working surfaces of the upper and lower top bolts are plated with hard chrome, the surface is wear-resistant and beautiful, and the bottom top bolt can pass through cold and hot media.
6. The unloading door adopts double rack type hydraulic cylinder, and the linear cylinder is locked, working stably and positioning accurately.
7. Adopt double output shaft hard tooth surface reducer, and adopt gear coupling or cross universal coupling to drive, the transmission is flat
High stability and efficiency, low noise and long service life.

Online Inquiry

Username used for comment:
客户留言
Description:
code

Website

Tengyu

Mobile official website

Wuxi Tengyu Environmental Protection Technology Co.,Ltd

Service Hotline: 

Company address:

No. 126, Xinyuan Road, Ehu Town, Xishan District, Wuxi City, Jiangsu Province

All rights reserved:Wuxi Tengyu Environmental Protection Technology Co.,Ltd     苏ICP备2023005789号-1    www.300.cn

All rights reserved:Wuxi Tengyu Environmental Protection Technology Co.,Ltd

苏ICP备2023005789号-1

www.300.cn